Tu carrito
😊 Product added to cart successfully
Product removed to cart successfully
Volvo All Engines (2013 Emissions) Fault Code: P242A01 PID: ACM Exhaust Gas Temperature Sensor Bank 1 Sensor 3
Volvo All Engines (2013 Emissions) Fault Code: P242A01 PID: ACM Exhaust Gas Temperature Sensor Bank 1 Sensor 3
Circuit description
This diagnostic function indicates malfunction at the exhaust gas temperature (EGT) sensor. The purpose of the exhaust gas sensor is to contribute the relevant temperatures required for the temperature regulated aftertreatment diesel particulate filter regeneration control. A faulty EGT sensor can result with a failed aftertreatment (DPF) regeneration.
Conditions for diagnostic trouble code (DTC)
The voltage at pin A137:39 is less than 0.147705?V
Ignition key in ON position
Observable symptoms
Regeneration not possible
Probable cause
1) Wiring harness between component connector and electronic control unit (ECU) connector
2) Open circuit, Signal wire
3) Open circuit, Ground wire
4) Pre-catalyst, Exhaust Gas Temperature (EGT) Sensor
Volvo All Engines (2013 Emissions) Fault Code: P241E00 PID: ACM Reductant Heater Coolant Control Valve Stuck Closed
Volvo All Engines (2013 Emissions) Fault Code: P21CAA1 PID: ACM Reductant Control Module Supply Voltage
Volvo All Engines (2013 Emissions) Fault Code: P218F92 PID: ACM Reductant No Flow Detected
Volvo All Engines (2013 Emissions) Fault Code: P20FE00 PID: ACM Aftertreatment Reagent Pump Control Build Up Failure
Volvo All Engines (2013 Emissions) Fault Code: P20E997 PID: ACM Reductant Pressure Too High
Volvo All Engines (2013 Emissions) Fault Code: P20E892 PID: ACM Reductant Pressure Too Low