Ir directamente al contenido

Telegram : @Diezel365

Volvo All Engines (2013 Emissions) Fault Code: P218F92 PID: ACM Reductant No Flow Detected

Volvo All Engines (2013 Emissions) Fault Code: P218F92 PID: ACM Reductant No Flow Detected

Circuit description
The aftertreatment control module (ACM) uses the aftertreatment diesel exhaust fluid (DEF) dosing pressure sensor value to adjust and maintain DEF pressure at the DEF dosing valve by controlling DEF pump speed. If the pressure decreases below expected value when the pump is in initial pressure build-up mode or if the pressure increases above expected value when pump is in idle speed mode, the ACM considers DEF pressure outside of normal operating range and indicates a malfunction in a DEF dosing pressure sensor.

Observable symptoms
No aftertreatment diesel exhaust fluid (DEF) dosage

Probable cause
1) Restricted orifice in the aftertreatment fuel manifold
2) Damaged hoses and/or connections
3) Aftertreatment Diesel Exhaust Fluid (DEF) Pump

Volvo All Engines (2013 Emissions) Fault Code: P20FE00 PID: ACM Aftertreatment Reagent Pump Control Build Up Failure
Volvo All Engines (2013 Emissions) Fault Code: P20E997 PID: ACM Reductant Pressure Too High
Volvo All Engines (2013 Emissions) Fault Code: P20E892 PID: ACM Reductant Pressure Too Low
Volvo All Engines (2013 Emissions) Fault Code: P20E797 PID: ACM Reductant Injection Air Pressure Too High
Volvo All Engines (2013 Emissions) Fault Code: P20CA00 PID: ACM Reductant Injection Air Pressure Leakage
Volvo All Engines (2013 Emissions) Fault Code: P20C400 PID: ACM Aftertreatment Reagent Hose Heater 3 Short Circuit High