NOTE: This fault indicates that the motor control module (MCM) detects a short to power (voltage greater than 3.2. on...

NOTE: If codes 4077-0 or 3480-1 active, fix those first. PROBABLE CAUSES:1. Inspect entire exhaust system for leaks.2. Inspect all...

DESCRIPTION:This fault code sets when the intake manifold pressure is lower than expected while the engine is under a load....

DESCRIPTION:This fault sets when ambient and inlet manifold pressure difference is out of range low. MONITORED PARAMETER:Barometric pressure and intake...

PROBABLE CAUSES:1. Failed inlet manifold pressure sensor.2. Inlet manifold pressure sensor connector/harness.3. Charge air cooler failure. Detroit DD13 EPA07 (2007-09)...

NOTE: Please see the step by step troubleshooting procedures for this specific code. PROBABLE CAUSES:1. Failed inlet manifold pressure sensor.2....