Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3563 FMI 18 (MCM) Inlet Manifold Pressure Low

DESCRIPTION:This fault code sets when the intake manifold pressure is lower than expected while the engine is under a load.

MONITORED PARAMETER:Intake manifold pressure.

TYPICAL ENABLING CONDITIONS:Engine coolant temperature greater than 65°C (149°F).

MONITOR SEQUENCE:None

EXECUTION FREQUENCY:Continuous when enabling conditions met.

TYPICAL DURATION:15 seconds

DASH LAMPS:1. MIL2. CEL

ENGINE REACTION:None

VERIFICATION:1. Engine coolant greater than 65°C (149°F).2. Drive at steady highway speed with loaded trailer.3. Engine rpm greater than 1130 for a minimum of five minutes.

PROBABLE CAUSES:1. Failed inlet manifold pressure sensor.2. Inlet manifold pressure sensor connector/harness.3. Charge air cooler failure.

Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3563 FMI 4 (MCM) Intake Manifold Pressure Circuit Failed Low

Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3563 FMI 3 (MCM) Intake Manifold Pressure Circuit Failed High

Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3556 FMI 1 (MCM) Check for Regeneration Temperature Out of Range Low

Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3512 FMI 3 (MCM) 3V Sensor Supply Bank 1 Circuit Failed High

Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3511 FMI 3 (MCM) 3V Sensor Supply Bank 1 Circuit Failed High

Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3510 FMI 8 (CPC) 2-Channel Accelerator Pedal Supply Voltage Missing

Back to blog

Language

Currency