DESCRIPTION:This code is not configured for NAFTA applications. If this code is Active, CPC configuration is incorrect.

MONITORED PARAMETER:Engine oil level signal from MCM.

TYPICAL ENABLING CONDITIONS:Not Enabled

MONITOR SEQUENCE:None

EXECUTION FREQUENCY:None

TYPICAL DURATION:Two Seconds

DASH LAMPS:CEL

ENGINE REACTION:None

VERIFICATION:Key ON, engine OFF.

NOTE: If 100-1 and 100-3 are both active, work on repairing 100-3 first.

NOTE: If 100-1 and 100-4 are both active, work on repairing 100-4 first.

PROBABLE CAUSES:1. Low oil level, check system for leaks.2. Oil level sensor connector/harness.3. Oil level sensor.4. Oil level pressure fluctuating.