Volvo

Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 5 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #5. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #5. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #5 is faulty and must be replaced.2) Disconnect the...

Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 6 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #6. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #6. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #6 is faulty and must be replaced.2) Disconnect the...

Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 6 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #6. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #6. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #6 is faulty and must be replaced.2) Disconnect the...

Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 6 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #6. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #6. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #6 is faulty and must be replaced.2) Disconnect the...

Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 6 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #6. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #6. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #6 is faulty and must be replaced.2) Disconnect the...