Volvo

Volvo All Engines (2017 Emissions) Fault Code: P020413 PID: EMS Cylinder 4 Injector “A” Fuel Injector operation is controlled by the Engine Control Module (ECM). The ECM provides a common supply voltage to injectors 4,5,6 (Bank 2) and there are individual output transistor drivers inside the ECM to control each individual injector’s ground circuits. There are two solenoid circuits within the injector; a Needle Control Valve and a Spill Valve. Although they are separate circuits, the same fault code is used to identify a fault in the Needle Control Valve circuit and/or the Spill Valve circuit. Conditions for diagnostic trouble...

Volvo All Engines (2017 Emissions) Fault Code: P020456 PID: EMS Cylinder 4 Injector “A” Circuit descriptionFuel Injector operation is controlled by the Engine Control Module (ECM). The ECM provides a common supply voltage to injectors 4,5,6 (Bank 2) and there are individual output transistor drivers inside the ECM to control each individual injector’s ground circuits. There are two solenoid circuits within the injector; a Needle Control Valve and a Spill Valve. Although they are separate circuits, the same fault code is used to identify a fault in the Needle Control Valve circuit and/or the Spill Valve circuit. Observable symptomsUneven operation...

Volvo All Engines (2017 Emissions) Fault Code: P020511 PID: EMS Cylinder 5 Injector “A” Conditions for diagnostic trouble code (DTC)Injector (INJ) activated Observable symptomsLow PowerAbnormal noiseEngine is operating on only 5 cylinders Probable cause1) Connector2) Wiring harness3) Engine control module (ECM) Volvo All Engines (2017 Emissions) Fault Code: P020456 PID: EMS Cylinder 4 Injector “A” Volvo All Engines (2017 Emissions) Fault Code: P020412 PID: EMS Cylinder 4 Injector “A” Volvo All Engines (2017 Emissions) Fault Code: P020411 PID: EMS Cylinder 4 Injector “A” Volvo All Engines (2017 Emissions) Fault Code: P020356 PID: EMS Cylinder 3 Injector “A” Volvo All Engines...

Volvo All Engines (2017 Emissions) Fault Code: P020512 PID: EMS Cylinder 5 Injector “A” Circuit descriptionFuel Injector operation is controlled by the Engine Control Module (ECM). The ECM provides a common supply voltage to injectors 4,5,6 (Bank 2) and there are individual output transistor drivers inside the ECM to control each individual injector’s ground circuits. There are two solenoid circuits within the injector; a Needle Control Valve and a Spill Valve. Although they are separate circuits, the same fault code is used to identify a fault in the Needle Control Valve circuit and/or the Spill Valve circuit. Conditions for diagnostic...

Volvo All Engines (2017 Emissions) Fault Code: P020513 PID: EMS Cylinder 5 Injector “A” Circuit descriptionFuel Injector operation is controlled by the Engine Control Module (ECM). The ECM provides a common supply voltage to injectors 4,5,6 (Bank 2) and there are individual output transistor drivers inside the ECM to control each individual injector’s ground circuits. There are two solenoid circuits within the injector; a Needle Control Valve and a Spill Valve. Although they are separate circuits, the same fault code is used to identify a fault in the Needle Control Valve circuit and/or the Spill Valve circuit. Conditions for diagnostic...