Tu carrito
😊 Product added to cart successfully
Product removed to cart successfully
Volvo All Engines (2013 Emissions) Fault Code: U032300 PID: EMS Software Incompatibility With Instrument Panel Control Module
Volvo All Engines (2013 Emissions) Fault Code: U032300 PID: EMS Software Incompatibility With Instrument Panel Control Module
The Idle Validation Switch is open at the idle position and transmits no voltage to the (VECU) Vehicle Electronic Control Unit. At approximately 1-13% pedal position the Idle Validation Switch closes and completes the circuit to the (VECU) Vehicle Electronic Control Unit.
The (VECU) Vehicle Electronic Control Unit then sends a voltage signal to the Engine Control Module (ECM) indicating accelerator pedal position. If both communication links (J1939, J1587) are faulty the pedal demand functionality enters limp-home. During limp-home the (IVS) Idle Validation Switch is used for ramping requested torque.
Conditions for diagnostic trouble code (DTC):
1) Incorrect vehicle identification number (VIN) from Instrument Cluster (IC)
Probable cause
1) The electronic control unit (ECU) has a software fault or the wrong software version
Volvo All Engines (2013 Emissions) Fault Code: U010A00 PID: EMS Lost Communication with Exhaust Gas Recirculation Control Module A
Volvo All Engines (2013 Emissions) Fault Code: P2BAE00 PID: EMS NOx Exceedence – NOx Control Monitoring System
Volvo All Engines (2013 Emissions) Fault Code: P2BAD00 PID: EMS NOx Exceedence – Root Cause Unknown
Volvo All Engines (2013 Emissions) Fault Code: P2BAB00 PID: EMS NOx Exceedence – Incorrect EGR Flow
Volvo All Engines (2013 Emissions) Fault Code: P2BAA00 PID: EMS NOx Exceedence – Low Reagent Consumption
Volvo All Engines (2013 Emissions) Fault Code: P2BA900 PID: EMS NOx Exceedence – Insufficient Reagent Quality