Ir directamente al contenido

Telegram : @Diezel365

PACCAR PX-9 CM2350 (2013-17) Fault Code:2998 PID: SPN:1632 FMI:14 Engine Torque Limit Feature – Special Instructions

Reason:
Engine Torque Limit Feature – Special Instructions

Effect:
None on performance

Circuit Description:
This is an information only fault that will only become active if the engine has been operated above a calibrated torque threshold.

Component Location:
The ECM mounting location varies, depending on the engine model, and may be mounted either on or off the engine.

Conditions for Running the Diagnostics:
This diagnostic runs continuously when the engine is running.

Conditions for Setting the Fault Codes:
The Engine Control Module (ECM) detected the engine was being operated above the maximum torque threshold.

Action Taken When the Fault Code is Active:
The ECM illuminates the amber CHECK ENGINE lamp immediately when the diagnostic runs and fails

Conditions for Clearing the Fault Code:
The ECM will turn off the amber CHECK ENGINE lamp immediately after the diagnostic runs and passes.

Shop Talk:
This fault will go inactive once the engine is operated below the maximum torque threshold in the calibration.

Possible Causes:
1) Inactive fault codes
2) Faulty ECM

PACCAR PX-9 CM2350 (2013-17) Fault Code:298 PID:443 SPN:1388 FMI:4 Auxiliary Pressure Sensor Input 2 Circuit – Voltage Below Normal or Shorted to Low Source
PACCAR PX-9 CM2350 (2013-17) Fault Code:2976 PID: SPN:3361 FMI:2 Aftertreatment 1 Diesel Exhaust Fluid Dosing Unit Temperature – Data Erratic, Intermittent, or Incorrect
PACCAR PX-9 CM2350 (2013-17) Fault Code:2973 PID:102 SPN:102 FMI:2 Intake Manifold 1 Pressure – Data Erratic, Intermittent, or Incorrect
PACCAR PX-9 CM2350 (2013-17) Fault Code:297 PID:297 SPN:1388 FMI:3 Auxiliary Pressure Sensor Input 2 Circuit – Voltage Above Normal or Shorted to High Source
PACCAR PX-9 CM2350 (2013-17) Fault Code:2964 PID:105 SPN:105 FMI:0 Intake Manifold 1 Temperature – Data Valid But Above Normal Operational Range – Least Severe Level
PACCAR PX-9 CM2350 (2013-17) Fault Code:2964 PID:105 SPN:105 FMI:15 Intake Manifold 1 Temperature – Data Valid But Above Normal Operational Range – Least Severe Level