SET CONDITIONS: The PCI ECU (D420) detects that the turbo speed is above 115,000 rpm for more than 3 seconds.
DIAGNOSTIC CONDITION: This diagnostic runs continuously when the engine is running.
CORRESPONDING OBD READINESS MONITOR: None
RESET CONDITION: This DTC changes to inactive when the fault is no longer detected.
REPAIR VERIFICATION: 1. Clear all DTCs. 2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions. 3. Did the DTC come back? – No, repair successful – Yes, repair unsuccessful
ADDITIONAL INFORMATION: IMPORTANT: Do not troubleshoot this DTC when other VTG position-related DTCs are present. In that case, troubleshoot the VTG position-related DTCs first.