DESCRIPTION:
Fuel tank level sensor stuck in position.

MONITORED PARAMETER:
Fuel tank level.

TYPICAL ENABLING CONDITIONS:
Always enabled

MONITOR SEQUENCE:
None

EXECUTION FREQUENCY:
Always enabled

TYPICAL DURATION:
5 seconds

DASH LAMPS:
MIL

ENGINE REACTION:
None

VERIFICATION:
Engine rpm = idle or higher.

NOTE: If code 96-2 appears after the fuel system was repaired or fuel filters changed, clear the codes and test drive to see if they come back.

PROBABLE CAUSES:
1. Below 25% fuel level.
2. Fuel contamination (water, DEF, gas, coolant, etc…).
3. Fuel leaks.
4. Fuel level sensor.
5. Fuel level sensor wiring/connector.