DESCRIPTION:This code sets when the MCM detects that there is a short to ground on the circuits for the injector amplifier control valve on cylinder 4, 5 and/or 6.

MONITORED PARAMETER:Injector amplifier control valve cylinder 4, 5, 6.

TYPICAL ENABLING CONDITIONS:Fuel injector system nozzle opening pressure reading greater than 1.85.

MONITOR SEQUENCE:None

EXECUTION FREQUENCY:Continuous when enabling conditions met.

TYPICAL DURATION:Two seconds

DASH LAMPS:1. MIL2. CEL

ENGINE REACTION:Derate 25%

VERIFICATION:Engine rpm 1400 to 1500: One minute.

PROBABLE CAUSES:1. Connector outside the valve cover.2. Under valve cover fuel injector harness.3. Failed fuel injector #4, #5, or #6.4. Wiring between the valve cover connector and the 120-pin ECM connection.