Paccar

PACCAR MX (2004 Emissions) Fault Code: U1841 CAN – Message (VDC2) Time-Out from Brake System SET CONDITIONS:This DTC is set when the repetition rate of the received CAN message is lower than expected or when the message is not received at all. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did the DTC come back?– No,...

PACCAR MX (2004 Emissions) Fault Code: U1843 CAN – Message (VDHR) Time-Out from Tachograph SET CONDITIONS:This DTC is set when the repetition rate of the received CAN message is lower than expected or when the message is not received at all. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did the DTC come back?– No, repair...

PACCAR MX (2004 Emissions) Fault Code: U1844 CAN Communication – Message (AIR1) Out of Range, Air Compressor Status from Air Supply System SET CONDITIONS:This DTC is set when a CAN message is received correctly, but the content (signal value or status) is out of the expected range. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did...

PACCAR MX (2004 Emissions) Fault Code: U1846 CAN – Message (AIR1) Time-Out from Air Supply System SET CONDITIONS:This DTC is set when the repetition rate of the received CAN message is lower than expected or when the message is not received at all. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did the DTC come back?–...

PACCAR MX (2004 Emissions) Fault Code: U1847 PCI ECU Software Verification – Incorrect SET CONDITIONS:The PCI ECU detects that the calibration verification number (CVN) is incorrect. DIAGNOSTIC CONDITION:This diagnostic runs once when the ignition is keyed on. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:This DTC changes to inactive next time the ignition is keyed on and the fault is no longer detected. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did the DTC come back? (Can be pending, inactive or active)– No, repair successful– Yes, repair unsuccessful POSSIBLE CAUSES:Reprogram the...