Detroit Diesel
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 523 FMI 13 (MCM, CPC) Transmission Current Gear Signal Missing
Posted by Diezel Solutions on
NOTE: Please see the step by step troubleshooting procedures for this specific code. PROBABLE CAUSES:1. If any codes related to battery voltage are present, fix those first.2. If 625-9 present, troubleshoot that instead.3. If any engine modules have been programmed recently, check configuration.4. Another computer module on the truck (ABS, transmission, cab, etc…) has a failure that is causing this. Detroit DD13 EPA10 (2010-13) Fault Code: SPN 513 FMI 9 (ACM) Actual Torque Signal Not Available via CAN Detroit DD13 EPA10 (2010-13) Fault Code: SPN 411 FMI 13 (MCM) EGR Delta Pressure Sensor Out of Calibration Detroit DD13 EPA10 (2010-13)...
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 523 FMI 19 (MCM, CPC) Transmission Current Gear Signal is Erratic
Posted by Diezel Solutions on
NOTE: Please see the step by step troubleshooting procedures for this specific code. PROBABLE CAUSES:1. If any codes related to battery voltage are present, fix those first.2. If 625-9 present, troubleshoot that instead.3. If any engine modules have been programmed recently, check configuration.4. Another computer module on the truck (ABS, transmission, cab, etc…) has a failure that is causing this. Detroit DD13 EPA10 (2010-13) Fault Code: SPN 523 FMI 13 (MCM, CPC) Transmission Current Gear Signal Missing Detroit DD13 EPA10 (2010-13) Fault Code: SPN 513 FMI 9 (ACM) Actual Torque Signal Not Available via CAN Detroit DD13 EPA10 (2010-13) Fault...
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 524 FMI 9 (CPC) J1939 ETC2 Message Missing
Posted by Diezel Solutions on
DESCRIPTION:This fault code sets when the motor control module (MCM) detects that there is EGR pressure when the engine is not running. MONITORED PARAMETER:EGR delta pressure. TYPICAL ENABLING CONDITIONS:Coolant temperature greater than 80°C (176°F) and ignition is cycled off for 10 seconds. MONITOR SEQUENCE:None EXECUTION FREQUENCY:Continuous when enabling conditions met. TYPICAL DURATION:15 seconds DASH LAMPS:1. MIL2. CEL ENGINE REACTION:Derate 25% VERIFICATION:1. Run the engine until the coolant temperature is greater than 80°C (176°F).2. Turn the ignition off for 15 seconds.3. Turn the ignition on as a recheck for the fault code. PROBABLE CAUSES:1. EGR delta p sensor failure.2. EGR delta...
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 524287 FMI 19 (CPC) Predictive Cruise Control Device Reporting Error
Posted by Diezel Solutions on
NOTE: Please see the step by step troubleshooting procedures for this specific code. PROBABLE CAUSES:1. If any battery voltage codes present, fix those first.2. If any 625-xx codes, fix those first.3. If the CPC4 has been recently programmed, ensure the parameters are correct.4. Turn key off for 5 minutes, then turn back on. Detroit DD13 EPA10 (2010-13) Fault Code: SPN 524287 FMI 9 (CPC) Predictive Cruise Control Message Not Received Detroit DD13 EPA10 (2010-13) Fault Code: SPN 520250 FMI 4 (MCM) Quantity Control Valve Low Side Driver Error Detroit DD13 EPA10 (2010-13) Fault Code: SPN 520249 FMI 4 (MCM) Quantity...
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 524287 FMI 9 (CPC) Predictive Cruise Control Message Not Received
Posted by Diezel Solutions on
NOTE: Please see the step by step troubleshooting procedures for this specific code. PROBABLE CAUSES:1. If any battery voltage codes present, fix those first.2. If any 625-xx codes, fix those first.3. If the CPC4 has been recently programmed, ensure the parameters are correct. Detroit DD13 EPA10 (2010-13) Fault Code: SPN 520250 FMI 4 (MCM) Quantity Control Valve Low Side Driver Error Detroit DD13 EPA10 (2010-13) Fault Code: SPN 520249 FMI 4 (MCM) Quantity Control Valve Low Side Driver Error Detroit DD13 EPA10 (2010-13) Fault Code: SPN 520249 FMI 4 (ACM) Selective Catalytic Reduction Inlet Temperature High Detroit DD13 EPA10 (2010-13)...