DESCRIPTION:Electronic Dosing Valve (EDV) circuit failed low. MONITORED PARAMETER:HC Doser Circuit TYPICAL ENABLING CONDITIONS:Always enabled MONITOR SEQUENCE:None EXECUTION FREQUENCY:Always enabled...

DESCRIPTION:Electronic Dosing Valve (EDV) circuit failed open. MONITORED PARAMETER:HC Doser Circuit TYPICAL ENABLING CONDITIONS:Always enabled MONITOR SEQUENCE:None EXECUTION FREQUENCY:Always enabled...

DESCRIPTION:This fault will become active once the fuel compensation pressure reaches and stays above 599 kPa (87 psi) for GEN1...

DESCRIPTION:This code sets when the motor control module (MCM) detects that the fuel compensation pressure is lower that 358 kPa...

DESCRIPTION:Hydrocarbon (HC) doser fuel line pressure (FLP) sensors-failed self test. MONITORED PARAMETER:Doser fuel line pressure. TYPICAL ENABLING CONDITIONS:Dosing enabled MONITOR...

NOTE: The code occurs when the cut off is commanded to 100% and the compensation pressure is greater than 95...