Paccar

PACCAR MX (2004 Emissions) Fault Code: P0567 CAN Communication – Message (CCVS) Out of Range, Cruise Control Resume Switch From Vehicle Control System SET CONDITIONS:This DTC is set when a CAN message is received correctly, but the content (signal value or status) is out of the expected range. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3....

PACCAR MX (2004 Emissions) Fault Code: P0568 CAN Communication – Message (CCVS) Out of Range, Cruise Control Set Switch from Vehicle Control System SET CONDITIONS:This DTC is set when a CAN message is received correctly, but the content (signal value or status) is out of the expected range. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3....

PACCAR MX (2004 Emissions) Fault Code: P0571 CAN Communication – Message (CCVS) Out of Range, Brake Switch from Vehicle Control System SET CONDITIONS:This DTC is set when a CAN message is received correctly, but the content (signal value or status) is out of the expected range. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did the...

PACCAR MX (2004 Emissions) Fault Code: P060A PCI ECU – Internal Error SET CONDITIONS:The PCI ECU (D420) detects that the programmed software in the ECU is not functioning correctly. DIAGNOSTIC CONDITION:This diagnostic runs continuously when the ignition is on. RESET CONDITION:This DTC changes to inactive when the fault is no longer detected. POSSIBLE CAUSES:Reprogram the ECU

PACCAR MX (2004 Emissions) Fault Code: P060C Internal ECU Injector Power Generation – Malfunction SET CONDITIONS:The PCI ECU (D420) detects an internal error on the injector control. DIAGNOSTIC CONDITION:This diagnostic runs once after the ignition is keyed on. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:This DTC changes to inactive when the fault is no longer detected. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did the DTC come back?– No, repair successful– Yes, repair unsuccessful POSSIBLE CAUSES:Clear the DTC with the diagnostic service tool. Start the engine and let it...