NOTE: This fault is caused by low power on cylinder #1. Motor control module (MCM) adjusts injector pulse for smooth idle – min valve reached.
DESCRIPTION:Cylinder #1 engine smoothness control quantity low.
MONITORED PARAMETER:Cylinder 1 fueling error.
TYPICAL ENABLING CONDITIONS:Engine smoothness control.
MONITOR SEQUENCE:None
EXECUTION FREQUENCY:Continuous when enabling conditions met.
TYPICAL DURATION:Two seconds
DASH LAMPS:MIL
ENGINE REACTION:None
POSSIBLE CAUSES:The entry conditions for this code are:1. Engine speed is above low idle.2. All cylinders are active, no fault reactions.3. Engine speed/torque is steady.
This fault can occur due to the conditions listed below:1. Drivetrain vibrations.2. Cylinder kit failure.3. Valve train failure.4. Lash adjustments.5. Fuel injector.6. High pressure fuel line (rail to fuel injector).7. Debris entering fuel injector (intermittent faults).
NOTE: This fault is caused by lower power to the cylinder.
PROBABLE CAUSES:1. Cylinder kit failure.2. Valve train failure.3. Lash adjustment.4. Fuel injector.5. High pressure fuel line (rail to injector).6. Debris entering fuel injector (intermittent faults).