Meteen naar de content

Telegram : @Diezel365

Detroit DD13 EPA10 (2010-13) Fault Code: SPN 4752 FMI 0 (MCM) Exhaust Gas Recirculation Cooler Low Efficiency

DESCRIPTION:Exhaust Gas Recirculation (EGR) cooler low efficiency.

MONITORED PARAMETER:Intake manifold and charge air cooler outlet temperature sensors.

TYPICAL ENABLING CONDITIONS:1. Coolant temperature greater than 70°C (158°F)2. Engine running greater than 5 minutes.

MONITOR SEQUENCE:None

EXECUTION FREQUENCY:Always enabled

TYPICAL DURATION:10

DASH LAMPS:1. MIL2. CEL

ENGINE REACTION:Derate 10%

VERIFICATION:1. Start engine.2. Warm up such that coolant temperature greater than 70°C (158°F).3. Run engine greater than 5 minutes.

NOTE: If there are any cooling system related issues, fix those first.

PROBABLE CAUSES:1. Intake manifold air temperature sensor.2. Intake manifold air temperature sensor connector/harness.3. EGR system leaks (Look for soot).4. Remove the EGR hot pipe, EGR crossover tube, and mixer pipe. If blockage found, replace the EGR Cooler.

Detroit DD13 EPA10 (2010-13) Fault Code: SPN 4375 FMI 6 (ACM) Diesel Exhaust Fluid Pump Supply Current High
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 4375 FMI 5 (ACM) Diesel Exhaust Fluid Pump Circuit Failed Open
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 4375 FMI 4 (ACM) Diesel Exhaust Fluid Pump Circuit Failed Low
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 4375 FMI 3 (ACM) Diesel Exhaust Fluid Pump Circuit Failed High
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 4364 FMI 18 (ACM) Selective Catalyst Reduction NOx Conversion Low
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 4364 FMI 1 (ACM) Selective Catalyst Reduction NOx Conversion Very Low