Cummins ISX CM870 (2003-06) Fault Code: 223 PID: S085 SPN: 1265 FMI: 4/4 Centinel? oil control valve circuit – shorted low. Low signal voltage detected at Centinel? oil control valve circuit.

This fault is logged when the ECM commands the Centinel? oil control valve ON and detects a lower signal voltage than expected at the output.

Possible causes:

1)Short circuit to ground in the oil control valve or engine harness.2)Faulty ECM circuit3)Low internal resistance of Centinel? oil control valve.

Possible repairs:

1)Replace the Centinel? oil control valve.2)Replace the ECM.3)Repair or replace the engine harness.

Cummins ISX CM870 (2003-06) Fault Code: 222 PID: P108 SPN: 108 FMI: 4/4 Barometric Pressure Sensor Circuit – Voltage Below Normal or Shorted to Low Source. Low signal voltage detected at barometric pressure circuit.

Cummins ISX CM870 (2003-06) Fault Code: 221 PID: P108 SPN: 108 FMI: 3/3 Barometric Pressure Sensor Circuit – Voltage Above Normal or Shorted to High Source. High signal voltage detected at barometric pressure circuit.

Cummins ISX CM870 (2003-06) Fault Code: 219 PID: P017 SPN: 1380 FMI: 1/17 Engine Oil Level Number 2 (Remote) Low – Maintenance. Low oil level detected in the Centinel? makeup oil tank.

Cummins ISX CM870 (2003-06) Fault Code: 214 PID: P175 SPN: 175 FMI: 0/0 Engine Oil Temperature – Data Valid But Above Normal Operating Range – Most Severe Level. Engine oil temperature signal indicates engine oil temperature above engine protection critical limit.

Cummins ISX CM870 (2003-06) Fault Code: 213 PID: P175 SPN: 175 FMI: 4/4 Engine Oil Temperature Sensor 1 Circuit – Voltage Below Normal or Shorted to Low Source. Low signal voltage detected at the engine oil temperature circuit.

Cummins ISX CM870 (2003-06) Fault Code: 212 PID: P175 SPN: 175 FMI: 3/3 Engine Oil Temperature Sensor 1 Circuit – Voltage Above Normal or Shorted to High Source. High signal voltage or an open circuit detected at the engine oil temperature circuit

Terug naar blog

Taal

Land/regio