Meteen naar de content

Telegram : @Diezel365

Cummins ISM CM875 (2003-06) Fault Code: 2373 PID: P95 SPN: 1209 FMI: 3/3 Exhaust Gas Pressure Sensor Circuit – Voltage Above Normal or Shorted to High Source. High signal voltage detected at the exhaust gas pressure circuit.

The exhaust gas pressure sensor shares supply and return wires in the engine harness with other sensors. Opens and shorts in the engine harness can cause multiple fault codes to be active.Possible causes:

1)An open return circuit in the engine harness, connectors, or sensor.2)A signal wire shorted to sensor supply or battery voltage.

Possible repairs:

1)Replace the exhaust gas pressure sensor.2)Replace the ECM.3)Repair or replace the engine harness.

Cummins ISM CM875 (2003-06) Fault Code: 2372 PID: P95 SPN: 95 FMI: 0/16 Fuel filter restriction moderately high – warning. Fuel filter is plugged or fuel inlet restriction is high.
Cummins ISM CM875 (2003-06) Fault Code: 2368 PID: S82 SPN: 1112 FMI: 3/3 Engine Brake Actuator Circuit Number 3 – shorted high. Open circuit or high voltage detected at the engine brake solenoid Number 3 signal circuit.
Cummins ISM CM875 (2003-06) Fault Code: 2367 (V2) PID: S28 SPN: 1072 FMI: 3/3 Engine Brake Actuator Driver Output 2 Circuit – Voltage Above Normal or Shorted to High Source. Open circuit or high voltage detected at the engine brake solenoid number 2 signal circuit.
Cummins ISM CM875 (2003-06) Fault Code: 2367 (V1) PID: S28 SPN: 1072 FMI: 3/3 Engine Brake Actuator Driver Output 2 Circuit – Voltage Above Normal or Shorted to High Source. Open circuit or high voltage detected at the engine brake solenoid Number 2 signal circuit.
Cummins ISM CM875 (2003-06) Fault Code: 2366 (V2) PID: S28 SPN: 1072 FMI: 3/3 Engine Brake Actuator Circuit Number 1 – shorted high. Open circuit or high voltage detected at the engine brake solenoid number 1 signal circuit.
Cummins ISM CM875 (2003-06) Fault Code: 2366 (V1) PID: S28 SPN: 1072 FMI: 3/3 Engine Brake Actuator Circuit Number 1 – shorted high. Open circuit or high voltage detected at the engine brake solenoid number 1 signal circuit.