CAT
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 72 PID: SPN: 2 FMI: 11 Cylinder #2 Injector current fault
Geplaatst door Diezel Solutions op
The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder injector solenoid.•A high current condition (short circuit) exists in the injector solenoid. Probable Causes: 1) ECM Connection/Harness2) Cylinder injector failure3) Injector solenoid failure4) Harness from ECM to valve cover connector5) ECM failure6) Injector harness under valve cover
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 73 PID: SPN: 3 FMI: 11 Rectángulo: esquinas redondeadas 1
Geplaatst door Diezel Solutions op
The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder injector solenoid.•A high current condition (short circuit) exists in the injector solenoid. Probable Causes: 1) ECM Connection/Harness2) Cylinder injector failure3) Injector solenoid failure4) Harness from ECM to valve cover connector5) ECM failure6) Injector harness under valve cover
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 73 PID: SPN: 4 FMI: 11 Cylinder #4 Injector current fault
Geplaatst door Diezel Solutions op
The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder injector solenoid.•A high current condition (short circuit) exists in the injector solenoid. Probable Causes: 1) ECM Connection/Harness2) Cylinder injector failure3) Injector solenoid failure4) Harness from ECM to valve cover connector5) ECM failure6) Injector harness under valve cover
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 74 PID: SPN: 5 FMI: 11 Cylinder #5 Injector current fault
Geplaatst door Diezel Solutions op
The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder injector solenoid.•A high current condition (short circuit) exists in the injector solenoid. Probable Causes: 1) ECM Connection/Harness2) Cylinder injector failure3) Injector solenoid failure4) Harness from ECM to valve cover connector5) ECM failure6) Injector harness under valve cover
CAT 3126E Fault Code: PID: Flash Code 18 SPN: 42 FMI: 11 Injection Actuation Pressure Control Valve Driver Fault
Geplaatst door Diezel Solutions op
The acceleator pedal throttle position sensor supply voltage is lower than it should be.