DESCRIPTION:
Invalid data on engine Controller Area Network (CAN) Link.
MONITORED PARAMETER:
CAN communication
TYPICAL ENABLING CONDITIONS:
Always enabled
MONITOR SEQUENCE:
None
EXECUTION FREQUENCY:
Always enabled
TYPICAL DURATION:
2 seconds
DASH LAMPS:
1. MIL
2. CEL
ENGINE REACTION:
None
VERIFICATION:
Engine Idle: One minute.
NOTE: If any engine computer modules have been programmed recently, it may cause this code to be inactive. Reset the codes, test drive, and see if they come back.
PROBABLE CAUSES:
1. Low battery voltage.
2. Wiring between the MCM 21-pin connector and the battery.
3. Wiring between the MCM 21-pin connector and the CPC #4 connector.
Detroit DD16 GHG14 (2014-16) Fault Code: SPN 625 FMI 2 (ACM) CPC Message Not Received or has Stopped Arriving
Detroit DD16 GHG14 (2014-16) Fault Code: SPN 615 FMI 14 (MCM) Internal or External Leakage of the High Pressure Fuel System
Detroit DD16 GHG14 (2014-16) Fault Code: SPN 615 FMI 9 (MCM) J1939 DM1 Message from the Transmission is Missing
Detroit DD16 GHG14 (2014-16) Fault Code: SPN 615 FMI 5 (MCM) Axial Power Turbine Air Seal Pressure Regulator Valve Circuit Failed Open
Detroit DD16 GHG14 (2014-16) Fault Code: SPN 615 FMI 4 (MCM) Axial Power Turbine Air Seal Pressure Regulator Valve Circuit Failed High
Detroit DD16 GHG14 (2014-16) Fault Code: SPN 615 FMI 3 (MCM) Axial Power Turbine Air Seal Pressure Regulator Valve Circuit Failed High