DESCRIPTION:This fault code sets when the intake manifold pressure is lower than expected while the engine is under a load.
MONITORED PARAMETER:Intake manifold pressure.
TYPICAL ENABLING CONDITIONS:Engine coolant temperature greater than 65°C (149°F).
MONITOR SEQUENCE:None
EXECUTION FREQUENCY:Continuous when enabling conditions met.
TYPICAL DURATION:15 seconds
DASH LAMPS:1. MIL2. CEL
ENGINE REACTION:None
VERIFICATION:1. Engine coolant greater than 65°C (149°F).2. Drive at steady highway speed with loaded trailer.3. Engine rpm greater than 1130 for a minimum of five minutes.
PROBABLE CAUSES:1. Failed inlet manifold pressure sensor.2. Inlet manifold pressure sensor connector/harness.3. Charge air cooler failure.
Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3563 FMI 4 (MCM) Intake Manifold Pressure Circuit Failed Low
Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3563 FMI 3 (MCM) Intake Manifold Pressure Circuit Failed High
Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3556 FMI 1 (MCM) Check for Regeneration Temperature Out of Range Low
Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3512 FMI 3 (MCM) 3V Sensor Supply Bank 1 Circuit Failed High
Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3511 FMI 3 (MCM) 3V Sensor Supply Bank 1 Circuit Failed High
Detroit DD13 EPA07 (2007-09) Fault Code: SPN 3510 FMI 8 (CPC) 2-Channel Accelerator Pedal Supply Voltage Missing