Volvo

The VIN check function is an addition to the immobilizer function. In this function the Engine Control Module (ECM) checks the VIN at number of other electronic control units (ECU:s) and if they are the same engine start is possible. A faulty ECM VIN leads to engine start disabled. Conditions for diagnostic trouble code (DTC):1) Engine control Module (ECM) receives no answer to the request for the vehicle identification number (VIN) from either the vehicle electronic control unit (ECU) or the outer lighting control unit (LCM) Observable symptoms1) Fuel supply disabled2) Engine cannot be started Probable cause1) Vehicle Control Unit...

The VIN check function is an addition to the immobilizer function. In this function the Engine Control Module (ECM) checks the VIN at number of other electronic control units (ECU:s) and if they are the same engine start is possible. A faulty ECM VIN leads to engine start disabled. Conditions for diagnostic trouble code (DTC):1) Incorrect vehicle identification number (VIN) from vehicle electronic control unit (ECU) or outer lighting control unit (LCM) Observable symptoms1) Fuel supply disabled Probable cause1) Vehicle Control Unit (VECU)2) Engine control module (ECM)3) Lighting Control Module (LCM) Volvo All Engines (2010 Emissions) Fault Code: SPN 237...

The J1587 serial data line is used as the standard communication link for on-board vehicle instrumentation, off-board service diagnostics and fleet management.The signal is used to present the total vehicle distance in the cluster to the driver. The VECU (Vehicle Electronic Control Unit) is linked to the Engine Control Module (ECM) via this data line. The ECM uses this signal to calculate the difference between the internal ECM estimated value and the distance information from the VECU. The ECM can also use the signal in some of its function instead of the internal distance information. Conditions for diagnostic trouble code...

The instrument cluster module is linked to the Engine Control Module (ECM) via these data link wires. The function is used to calculate functions related to time limits. Conditions for diagnostic trouble code (DTC):1) Time data failure Probable cause1) Instrument cluster Volvo All Engines (2010 Emissions) Fault Code: SPN 245 FMI 9 PID: Total Vehicle Distance Volvo All Engines (2010 Emissions) Fault Code: SPN 237 FMI 2 PID: PSID 161 Vehicle Identification Number Volvo All Engines (2010 Emissions) Fault Code: SPN 237 FMI 12 PID: PSID 161 Vehicle Identification Number Volvo All Engines (2010 Emissions) Fault Code: SPN 228 FMI...

The instrument cluster module is linked to the Engine Control Module (ECM) via these data link wires. The function is used to calculate functions related to time limits. Observable symptoms1) Malfunction indicator lamp (MIL) illuminated Probable cause1) Wrong time or date in instrument electrically erasable programmable read only memory (EEPROM) Detailed information1) Activation2) Faulty time information3) Deactivation4) System Date and Time, Programming Volvo All Engines (2010 Emissions) Fault Code: SPN 251 FMI 10 PID: Time Volvo All Engines (2010 Emissions) Fault Code: SPN 245 FMI 9 PID: Total Vehicle Distance Volvo All Engines (2010 Emissions) Fault Code: SPN 237 FMI...