Paccar
PACCAR MX (2004 Emissions) Fault Code: U1872 CAN Communication – Message (PROPB_CECU) Out of Range, Soft-Top Speed Limiter Switch from Vehicle Control System
Posted by Diezel Solutions on
PACCAR MX (2004 Emissions) Fault Code: U1872 CAN Communication – Message (PROPB_CECU) Out of Range, Soft-Top Speed Limiter Switch from Vehicle Control System SET CONDITIONS:This DTC is set when a CAN message is received correctly, but the content (signal value or status) is out of the expected range. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3....
PACCAR MX (2004 Emissions) Fault Code: U1873 CAN Communication – Message (ETC1) Out of Range, Gear Engaged from Transmission System
Posted by Diezel Solutions on
PACCAR MX (2004 Emissions) Fault Code: U1873 CAN Communication – Message (ETC1) Out of Range, Gear Engaged from Transmission System SET CONDITIONS:This DTC is set when a CAN message is received correctly, but the content (signal value or status) is out of the expected range. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. POSSIBLE CAUSES:1. A corrupt or empty CAN message2. A malfunction in the system from which the message originates ADDITIONAL INFORMATION:1. A ‘message out of range’ DTC...
PACCAR MX (2004 Emissions) Fault Code: U1874 CAN Communication – Message (ETC2) Out of Range, Transmission Actual Gear Ratio from Transmission System
Posted by Diezel Solutions on
PACCAR MX (2004 Emissions) Fault Code: U1874 CAN Communication – Message (ETC2) Out of Range, Transmission Actual Gear Ratio from Transmission System SET CONDITIONS:This DTC is set when a CAN message is received correctly, but the content (signal value or status) is out of the expected range. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did...
PACCAR MX (2004 Emissions) Fault Code: U1875 CAN Communication – Message (VDC1) Out of Range, VDC Brake Light Request from Brake System
Posted by Diezel Solutions on
PACCAR MX (2004 Emissions) Fault Code: U1875 CAN Communication – Message (VDC1) Out of Range, VDC Brake Light Request from Brake System SET CONDITIONS:This DTC is set when a CAN message is received correctly, but the content (signal value or status) is out of the expected range. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did...
PACCAR MX (2004 Emissions) Fault Code: U1876 CAN Communication – Message (AIR1) Out of Range, Air Pressure Circuit 1 from Air Supply System
Posted by Diezel Solutions on
PACCAR MX (2004 Emissions) Fault Code: U1876 CAN Communication – Message (AIR1) Out of Range, Air Pressure Circuit 1 from Air Supply System SET CONDITIONS:This DTC is set when a CAN message is received correctly, but the content (signal value or status) is out of the expected range. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3....