Paccar
PACCAR MX (2004 Emissions) Fault Code: U17C7 CAN – Message (TSCI_TXR) Time-Out from Transmission System
Posted by Diezel Solutions on
PACCAR MX (2004 Emissions) Fault Code: U17C7 CAN – Message (TSCI_TXR) Time-Out from Transmission System SET CONDITIONS:This DTC is set when the repetition rate of the received CAN message is lower than expected or when the message is not received at all. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did the DTC come back?– No,...
PACCAR MX (2004 Emissions) Fault Code: U17C8 CAN – Message (TSC1_VXR) Time-Out
Posted by Diezel Solutions on
PACCAR MX (2004 Emissions) Fault Code: U17C8 CAN – Message (TSC1_VXR) Time-Out SET CONDITIONS:This DTC is set when the repetition rate of the received CAN message is lower than expected or when the message is not received at all. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did the DTC come back?– No, repair successful– Yes,...
PACCAR MX (2004 Emissions) Fault Code: U17C9 CAN – Message (TSC1_SXR) Time-Out
Posted by Diezel Solutions on
PACCAR MX (2004 Emissions) Fault Code: U17C9 CAN – Message (TSC1_SXR) Time-Out SET CONDITIONS:This DTC is set when the repetition rate of the received CAN message is lower than expected or when the message is not received at all. DIAGNOSTIC CONDITION:The diagnostic runs continuously when the ignition is keyed on or when the engine is running. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:The DTC changes to inactive after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did the DTC come back?– No, repair successful– Yes,...
PACCAR MX (2004 Emissions) Fault Code: U17CA CAN Communication – Message (TSC1_AXCR) Message Checksum
Posted by Diezel Solutions on
PACCAR MX (2004 Emissions) Fault Code: U17CA CAN Communication – Message (TSC1_AXCR) Message Checksum SET CONDITIONS:This DTC is set when the checksum of the message does not match the checksum calculated by the receiving component. DIAGNOSTIC CONDITION:This diagnostic runs continuously when the ignition is on. CORRESPONDING OBD READINESS MONITOR:None RESET CONDITION:This DTC will change to inactive immediately after the diagnostic runs and passes. REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did the DTC come back?– No, repair successful– Yes, repair unsuccessful POSSIBLE CAUSES:1. External interference of the CAN...
PACCAR MX (2004 Emissions) Fault Code: U17CB CAN Communication – Message (TSC1_AXR) Message Count from Brake System
Posted by Diezel Solutions on
PACCAR MX (2004 Emissions) Fault Code: U17CB CAN Communication – Message (TSC1_AXR) Message Count from Brake System CORRESPONDING OBD READINESS MONITOR:None REPAIR VERIFICATION:1. Clear all DTCs.2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.3. Did the DTC come back?– No, repair successful– Yes, repair unsuccessful