NOTE: Do not interrupt regeneration once it has been initiated.

When this code is detected, the operator has two minutes to execute the entry conditions:1. Cycle clutch switch (Manual transmission).2. Cycle parking brake.3. Cycle neutral switch (Automatic transmission).4. Then initiate regeneration request.

NOTE: If this procedure is not completed within this time limit, the engine will shut down and the regeneration procedure must be restarted.

NOTE: When this code is active, driver has 2 minutes to execute the entry conditions: Cycle clutch switch, parking brake, neutral switch (automatics), and then initiate the regen process. If not completed, engine will shut down and regen procedure must be restarted.

PROBABLE CAUSES:Perform a parked regeneration.